Bacon Pecan Brittle Recipe (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

This is a temperature issue. Make sure the candy reaches exactly 300ºF / 149ºC, which is hard crack stage, before pouring onto baking sheet. See “Equipment Used to Make Peanut Brittle” for my recommended thermometer. If you're peanut brittle is still chewy after it cools, you may be able to save it!

In a nonstick saucepan, heat and stir sugar, corn syrup, water and salt over medium heat until sugar has dissolved. Over high heat, using a candy thermometer, cook sugar mixture to a hard crack stage (290 °F). Add pecans and butter and cook to 300 °F stirring all the time to keep the nuts from burning.

Be sure to use a candy thermometer to ensure it reaches 300 degrees F or hard crack stage. What does baking soda do to peanut brittle? Adding a little baking soda aerates the peanut brittle causing it to expand slightly for a crunchy texture that won't break your teeth when you chew it.

What Makes it Brittle? The sugar will be cooked to 300ºF (149ºC)—hard crack stage; which when set up would be hard like a lollipop. But peanut brittle is delicate and you can easily bite into it—how? The secret is in the baking soda.

- Preheat your oven to a low temperature, around 250°F (120°C). - Break the stale peanut brittle into smaller pieces. - Place the brittle pieces on a baking sheet in a single layer. - Heat the brittle in the oven for about 5 to 10 minutes, checking frequently to avoid overcooking.

What's important to know is that the corn syrup controls the grain of the brittle so adding too little and you have a grainy textured brittle, while adding too much will result in a stringy and sticky brittle.

If you beat too long, the candy will seize and start to crumble. If you don't beat it long enough, then pralines won't set properly and will stay soft and sticky. Work quickly to drop heaping tablespoons of pecan praline mixture onto the parchment paper-lined baking sheet.

Allow the pecans to dry in the shell for a couple of weeks or so. Once the nuts are dry enough, you'll be able to break open the hulls without much effort. Rounding up, always ensure to pick your pecans during the late fall. After all, you'll be able to snap the kernels effortlessly only when the nuts ripen.

#1 - Store in an airtight container

Quality options include glass containers with lids or plastic storage dishes with snap-on tops. As long as they keep out air, it should work perfectly for storing brittle.

Is brittle the same as toffee? ›

Brittles are typically composed mostly of sugar, while toffees contain a fair amount of butter and in some cases milk. This makes toffees fuller and richer in taste, while brittles are more purely sweet and sugary. Brittles are also much thinner than most toffees.

Boiling them first will soften the shell, making them easier to crack. The moisture will also reduce the mess by preventing so many tiny shell fragments. Once your pecans have cooled, you can start cracking them. A high quality nutcracker will be your best option for this step.

Peanut brittle turning white, often referred to as "sugaring," is typically the result of crystallization of the sugar in the candy. This crystallization can make the brittle appear white or cloudy rather than having a clear, glass-like consistency.

As the water converts to steam, the monosaccharides begin to saturate the solution, increasing their tendency to form crystals and precipitate, which results in a gritty brittle. To prevent this, you need to interfere with the ability of fructose to rejoin dextrose.

Praline is a softer candy, while brittle is very crunchy. This is determined by what temperature the sugar mixture reaches. At a lower temperature, the sugar, when cooled, will be chewy and soft. If cooked to a higher temperature, or "hard crack" stage, the sugar will be brittle when cooled.

If your peanut brittle is not hardening, it's because the sugar mixture did not get hot enough to properly caramelize, cool and become hard, crisp and crunchy. If you have this issue, next time, use a thermometer to make sure the peanut brittle mixture gets to 300°F.

Didn't combine ingredients right. Didn't get it hot enough. You have to hit hard crack stage heat or it's not going to harden.

Whether it's during the cooking, cooling, or storage process, moisture and humidity can ruin the best batch of brittle in minutes, leaving you with a soggy, sticky mess. This is why eliminating moisture anywhere you can is our top tip on how to store peanut brittle.